ifm
Programming Manual
ecomatmobile
System description
>
Using ifm maintenance tool
The
ifm
Maintenance Tool serves for easy transfer of the program code from the programming station
to the controller. As a matter of principle each application software can be copied to the controllers
ifm
using the
Maintenance Tool. Advantage: A programming system with CODESYS licence is not
required.
Here you will find the current
→
www.ifm.com
> Select your country > [Service] > [Download] > [Systems for mobile machines]
→
ecomatmobile
DVD "Software, tools and documentation" under the tab 'R360 tools [D/E]'
>
Distribution of the application program
We recommend the following sequence, if the application software is to be copied to the series
machine and used:
•
Saving the software
After completion of program development the latest version of the application program loaded in
the controller using the
data carrier using the name project_file.RESX. Only this process ensures that the application
software and its checksums are stored.
•
Download of the software.
To equip all machines of a series production with an identical software only this file may be loaded
in the controllers using the
•
An error in the data of this file is automatically recognised by the integrated checksum when
loaded again using the
BasicController (CR0403) Runtime System V03.02
ifm
Maintenance Tool:
ifm
Maintenance Tool has to be read from the controller and saved on a
ifm
Maintenance Tool.
ifm
Maintenance Tool.
34
2015-04-01
Software description
8492
8493