IFM Electronic CR0403 Programming Manual page 218

ifm Programming Manual ecomatmobile
Glossary of Terms
>
Intended use
Use of a product in accordance with the information provided in the instructions for use.
>
IP address
IP = Internet Protocol.
The IP address is a number which is necessary to clearly identify an internet participant. For the sake
of clarity the number is written in 4 decimal values, e.g. 127.215.205.156.
>
ISO 11898
Standard: Road vehicles – Controller area network
• Part 1: Data link layer and physical signalling
• Part 2: High-speed medium access unit
• Part 3: Low-speed, fault-tolerant, medium dependent interface
• Part 4: Time-triggered communication
• Part 5: High-speed medium access unit with low-power mode
>
ISO 11992
Standard: Interchange of digital information on electrical connections between towing and towed
vehicles
• Part 1: Physical and data-link layers
• Part 2: Application layer for brakes and running gear
• Part 3: Application layer for equipment other than brakes and running gear
• Part 4: Diagnostics
>
ISO 16845
Standard: Road vehicles – Controller area network (CAN) – Conformance test plan
>
J
J1939
→ SAE J1939
>
L
LED
LED = Light Emitting Diode.
Light emitting diode, also called luminescent diode, an electronic element of high coloured luminosity
at small volume with negligible power loss.
>
Link
A link is a cross-reference to another part in the document or to an external document.
>
LSB
Least Significant Bit/Byte
BasicController (CR0403) Runtime System V03.02
218
2015-04-01