IFM Electronic CR0403 Programming Manual page 213

ifm Programming Manual ecomatmobile
Glossary of Terms
>
CiA
CiA = CAN in Automation e.V.
User and manufacturer organisation in Germany / Erlangen. Definition and control body for CAN and
CAN-based network protocols.
Homepage → www.can-cia.org
>
CiA DS 304
DS = Draft Standard
CANopen device profile for safety communication
>
CiA DS 401
DS = Draft Standard
CANopen device profile for binary and analogue I/O modules
>
CiA DS 402
DS = Draft Standard
CANopen device profile for drives
>
CiA DS 403
DS = Draft Standard
CANopen device profile for HMI
>
CiA DS 404
DS = Draft Standard
CANopen device profile for measurement and control technology
>
CiA DS 405
DS = Draft Standard
CANopen specification of the interface to programmable controllers (IEC 61131-3)
>
CiA DS 406
DS = Draft Standard
CANopen device profile for encoders
>
CiA DS 407
DS = Draft Standard
CANopen application profile for local public transport
>
Clamp 15
In vehicles clamp 15 is the plus cable switched by the ignition lock.
>
COB ID
COB = Communication Object
ID = Identifier
ID of a CANopen communication object
Corresponds to the identifier of the CAN message with which the communication project is sent via the
CAN bus.
BasicController (CR0403) Runtime System V03.02
213
2015-04-01