IFM Electronic CR0403 Programming Manual page 23

ifm Programming Manual ecomatmobile
System description
>
Output group Q2 (OUT4...OUT7)
These outputs are a group of multifunction channels.
These outputs provide several function options (each output separately configurable):
• binary output, plus switching (BH)
• analogue output with Pulse Width Modulation (PWM)
• These outputs are not able for diagnosis.
Possible operating modes inputs/outputs
→ chapter
► Configuration of each output is made via the application program:
OUTPUT
→ FB (→ page 180)> input MODE
PWM output: → FB
► For the limit values please make sure to adhere to the data sheet!
BasicController (CR0403) Runtime System V03.02
PWM1000
(→ page 182)
(→ page 207)
23
2015-04-01
Hardware description
15235