IFM Electronic CR0403 Programming Manual page 116

ifm Programming Manual ecomatmobile
ifm function elements
>
Parameters of the outputs
Parameter
LEN
DATA
RESULT
Possible results for RESULT:
Value
Description
dec | hex
0 00 FB is inactive
1 01 FB execution completed without error – data is valid
5 05 FB is active – no data received yet
32 20 SDO transmission aborted by client or server
(SDO abort code 0x80)
33 21 TIMEOUT elapsed
242 F2 Error: setting is not possible
255 FF Error: not enough memory available for the consuming multiframe
BasicController (CR0403) Runtime System V03.02
Data type
DWORD
ARRAY [0..SDOMAXDATA] OF
BYTE
BYTE
116
ifm function elements for the device CR0403
Description
number of the bytes received
permissible values = 0x0000 0001...0x0000 0800 = 1...2 048
buffer memory for user data of the SDO data transmission
feedback of the function block
(possible messages → following table)
2015-04-01
7810