Table of Contents
Advertisement
Change filtering mode
A. From the Quick Start menu, press 3 to go to the Filter mode configuration
screen.
B. Select a filter mode (Invisible, Router, or Firewall) using up-arrow and down-
arrow keys. Press Y when you have selected the appropriate mode, or press
Esc to cancel this change.
Configure network interface LAN1
A. From the Quick Start menu, press 4 to go to the Configure Network Interface
screen for LAN1.
B. At the Enter interface LAN1 IP address prompt, type in the LAN1 IP address
and press Enter.
C. At the Enter interface LAN1 netmask prompt, type in the netmask for the
LAN1 IP address and press Enter.
D. Press Y to confirm, or press any other key to cancel this change.
Configure network interface LAN2
A. From the Quick Start menu, press 5 to go to the Configure Network Interface
screen for LAN2.
B. At the Enter interface LAN2 IP address prompt, type in the LAN2 IP address
and press Enter.
C. At the Enter interface LAN2 netmask prompt, type in the netmask for the
LAN2 IP address and press Enter.
D. Press Y to confirm, or press any other key to cancel this change.
Configure default gateway
A. From the Quick Start menu, press 6 to go to the Configure default gateway
screen.
B. At the Enter default gateway IP prompt, type in the gateway IP address and
press Enter.
C. Press Y to confirm, or press any other key to cancel this change.
Configure DNS servers
A. From the Quick Start menu, press 7 to go to the Configure Domain Name
Servers screen.
B. At the Enter first DNS server IP prompt, type in the IP address of the DNS
server to use and press Enter.
C. At the Enter (optional) second DNS server IP prompt, either type in the IP
address of an alternate DNS server to use and press Enter, or just press Enter
to bypass making a second DNS server entry.
M86 S
I
G
ECURITY
NSTALLATION
UIDE
I
S
S
1A: Q
NSTALL THE
ERVER
TEP
S
S
P
UICK
TART
ETUP
ROCEDURES
23
Advertisement
Table of Contents
