Configuring Report Transmissions; Sending A 12-Lead Report - ZOLL Propaq MD Operator's Manual

C 22 C
HAPTER OMMUNICATIONS

Configuring Report Transmissions

The Propaq MD unit can send 12-lead reports to the ZOLL RescueNet software. Distribution
List entries defined in your RescueNet account specify possible report destinations, each of
which consists of one or many recipients such as email addresses and fax machines. You must
have a RescueNet account set up before you can complete configuration of the Propaq MD
device.
In the Communications menu, select Reports Configure.
Enter your RescueNet Customer ID and Password in the fields provided.
Before you can transmit 12-lead reports, you must download the current Distribution List for
your account from the RescueNet server. If you have already configured your wireless
preferences, you can use the Update Distribution List button to complete the download.
The Propaq MD retains the current Distribution List until a new one is downloaded. If you
modify the Distribution List entries using RescueNet, you should download a new copy to the
Propaq MD device.

Sending a 12-lead report

When a 12-lead report has been acquired or a previously acquired 12-lead has been selected for
review, the Propaq MD unit prepares the report for transmission. When this is complete, the
Transmit quick access key(
To send a 12-lead report to a preconfigured distribution list:
1. Press the 12-lead quick access key(
If desired, press the snapshot button(
2.
ECG Interpretive Analysis for more information about acquiring 12-lead data).
Press the 12-lead review next quick access key (
3.
desired snapshot.
22–24
) displays.
).
) to take a 12-lead snapshot (see Chapter 14: 12-Lead
). A list of snapshots appears; select the
www.zoll.com 9650-0806-01 Rev. D