Entering The Patient Name And Id - ZOLL Propaq MD Operator's Manual

Figure 14-1 Patient Info Control Panel
The Propaq MD unit uses the name that you enter in the Patient Info panel to label the 12-lead
ECG monitoring snapshots that it saves.
To enter patient information, use the navigation keys to highlight and select a parameter on the
Patient Info panel, then press the Select key.

Entering the Patient Name and ID

When you select the Patient Last Name field (or the Patient First/Middle Name, ID, or
Physician fields), the screen displays an information entry panel:
To enter a character into the parameter, highlight the character, then press Select. The screen
displays the selected character in the area below the parameter name.
To navigate through the information entry panel, use the following keys:
Use the Row Up quick access key (
•
Use the Row Down quick access key (
•
Use the navigation keys on the front panel to highlight the next or previous character on the
information entry panel.
You can also select the following function keys on the information entry panel:
• Backspace
• Clear
• SAVE
• Cancel
9650-0806-01 Rev. D
Row
) to move to the previous row on the panel.
Row
) to move down one row on the panel.
Erases the last character entered.
Erases all characters entered.
Saves the characters entered for that parameter and returns you to the
Patient Info panel.
Returns you to the Patient Info panel without saving the characters
entered.
Propaq MD Operator's Guide
Entering Patient Information
14-3