ZOLL Propaq MD Operator's Manual page 257

Setting up Communications in the Supervisor Menu
Authentication Protocol (TLS or PEAP). Some fields will be greyed out, depending on the
Authentication Protocol that you select.
PEAP (Protected Extensible Authentication Protocol): If PEAP (Protected Extensible
Authentication Protocol) is selected, you must enter the Password corresponding to the Identity
entered. If the network requires it, you may enter an Anonymous Identity. The CA certificate is
also optional. Other options on the screen will be greyed out.
Note: The Propaq MD unit only supports PEAPv0/v1 + MSCHAPV2.
TLS (Transport Layer Security): If TLS is selected, you must select a Client Certificate and
enter the Private Key Password corresponding to the private key in the Certificate file. Other
options on the screen will be greyed out.
For all certificates and keys, you can choose from a list of pre-loaded files.
To load a new certificate from a USB device, select Manage Certificates & Keys. A list of
existing certificates will appear.
9650-0806-01 Rev. D Propaq MD Operator's Guide 22–17