Communications System Messages - ZOLL Propaq MD Operator's Manual

C 22 C
HAPTER OMMUNICATIONS

Communications System Messages

The Propaq MD unit may display one of the following status messages during the transmission:
System Message
TRYING TO CONNECT TO
NETWORK
TRYING TO CONNECT TO
SERVER
TRANSMITTING
TRANSMISSION COMPLETE
TRANSMISSION FAILED
22–26
Cause
The unit is connecting to the network.
The unit is connecting to the ZOLL server.
The data transfer is in progress
The data transfer is complete.
The data transfer has failed.
To correct the problem, check the following:
• Verify that wireless communications is enabled
on your Propaq MD unit.
• Verify that the WiFi settings are correct in the
Communications setup menu.
• Verify that the ZOLL server is configured
correctly.
• Verify that your cellular device is configured
correctly.
• Make sure that the Propaq MD unit is within
range of the wireless server.
www.zoll.com 9650-0806-01 Rev. D