Configuring 12-Lead Report Transmissions - ZOLL Propaq M Operator's Manual

Configuring 12-Lead Report Transmissions

The Propaq M unit can send 12-lead reports to the ZOLL RescueNet software. Distribution List
entries defined in your RescueNet account specify possible report destinations, each of which
consists of one or many recipients such as email addresses and fax machines. You must have a
RescueNet account set up before you can complete configuration of the Propaq M device.
To configure 12-Lead reports transmissions:
1. In the Communications menu, select Reports Configure.
Enter your RescueNet Customer ID and Password in the fields provided.
2.
In the Verify Certificate field specify
3.
certificate verification for the RescueNet 12-lead server. If the Verify Certificate field is set to
Enabled, when the
verifies the server's certificate and identity before the
verification fails, the Propaq M displays a status message indicating whether the failure was
a result of certificate or identity validation. Enabling this option improves the security of the
connection by confirming that the unit is communicating with the actual RescueNet server.
Note—
Authorities, including the CA used by the RescueNet server. All certificates, however, have
expiration dates. It may be necessary to update the CA certificate in order to maintain the ability
to successfully verify the RescueNet server's identity. Complete the following to update the CA
certificate used to verify the RescueNet server:
a. Insert a USB device with the certificates in the USB port on the right side of the Propaq
M device.
Select the Load CA Certificate from USB field. The Load from USB window displays
b.
with a list of available Root CA certificate files.
In the Files Available: field select the desired certificate.
c.
d. Select Load Selected field. A list of files on the USB device displays.
Use the arrow keys to select the desired certificate file then select Load Selected.
e.
f. Press
9650-000820-01 Rev. K
Propaq M
establishes a connection to the RescueNet 12-Lead Server it
The Propaq M comes with certificates file pre-loaded for common Certificate
to return to the 12-Lead Reports menu,
Propaq M Operator's Guide
Supervisor Communications Menu
whether or not you want to Enable or Disable (default)
12 Lead transmission can proceed. If the
15-29