Connecting The Co 2 Sampling Lines - ZOLL Propaq MD Operator's Manual

C 9 M
HAPTER ONITORING
Connecting the CO
To connect the FilterLine or Smart CapnoLine:
1. Slide open the Propaq MD unit's CO
Put the fitting at the end of the sidestream tubing over the CO
2.
3. Turn the fitting clockwise to tighten.
Figure 9-1 Connecting the Sampling Line Connector to the CO
9-4
CO2
Sampling Lines
2
www.zoll.com
inlet port cover.
2
2
inlet port connector.
Inlet Port
2
9650-0806-01 Rev. D