Procedures For Updating The Firmware Via Usb Connection - Konica Minolta bizhub 4020 Service Manual

5.8.3

Procedures for updating the firmware via USB connection

The following procedure explains the firmware update when the printer is connected to PC by using
USB cable.
NOTE: Before updating the firmware, install the printer drivers on the PC used for the firmware
update.
1. Store the firmware file (xxxx.fls) and an update tool (USBFlash.exe) which are
compatible with the product in an arbitrary directory of the PC.
2. Connect the PC with the printer using a USB cable.
3. Double-click the USBFlash.exe to start the update tool.
4. Click the [Browse Files] to open the firmware file stored directory.
5. Select the required firmware file and then click [Open].
6. Confirm that the correct firmware file is listed under [ENTER FILENAME TO FLASH TO
PRINTER].
7. Confirm that the correct printer model is listed under [SELECT PRINTER FROM LIST].
If not, click on the drop-down arrow to locate and select the correct model.
8. Click [START].
bizhub 4020/3320 Service Manual
- 230 -