Front Door Sensor Removal; Front Input Guide Removal - Konica Minolta bizhub 4020 Service Manual

bizhub 4020/3320 Service Manual
5. Slide the front access cover to the right, removing it from the print engine.

6.5.24 Front door sensor removal

1. Remove the front access cover. See Front access cover removal.
2. From under the right mount, remove the screw (A).
Note: Use a #1 Phillips screwdriver.

6.5.25 Front input guide removal

1. Remove the right cover. See Right cover removal.
2. Remove the MPF pick roller cover. See MPF pick roller cover removal.
3. Remove the MPF pick roller. See MPF pick roller removal.
4. Remove the jam access cover. See Jam access cover removal.
5. Remove the MPF tray. See MPF tray removal.
- 296 -