Duplex Sensor And Input Sensor Removal - Konica Minolta bizhub 4020 Service Manual

bizhub 4020/3320 Service Manual
6. Remove the four screws (A) securing the duplex.
Note: The duplex link (B) is part of the FRU.
6.6.4

Duplex sensor and input sensor removal

1. Remove the left cover. See Left cover removal.
2. Remove the right cover. See Right cover removal.
3. Remove the rear door and cover. See Rear exit door removal and Rear cover removal.
4. Remove the power supply. See Power supply removal.
5. Remove the power supply shield. See Power supply shield removal.
- 303 -