Konica Minolta bizhub 4020 Service Manual page 248

4. If the grid lines of the right flap align below the corresponding lines on the left flap, then adjust the
printhead clockwise relative to the printer, and recheck. If the grid lines of the left flap align below
the corresponding lines of the right side, then adjust the printhead counterclockwise.
5. Print another Quick test page, and check if adjustments are still needed.
6. After obtaining a properly adjusted image on the paper, tighten all the screws.
7. Align the printhead electronically.
bizhub 4020/3320 Service Manual
- 247 -