Rear Side Removals; Dust Cover Removal - Konica Minolta bizhub 4020 Service Manual

bizhub 4020/3320 Service Manual
5. Turn the printer on its side (right side down), then remove the three screws (B) from the right guide.
6. Remove the guide from the frame.
7. Squeeze the latches to release the connector, then push the connector off the guide.

6.7 Rear side removals

6.7.1

Dust cover removal

1. Press the latches on each side of the dust cover.
2. Remove the dust cover.
- 326 -