Usb Wireless Cable Removal (Bizhub 3320) - Konica Minolta bizhub 4020 Service Manual

bizhub 4020/3320 Service Manual

6.9.12 USB wireless cable removal (bizhub 3320)

1. Remove the right cover. See Right cover removal.
2. Remove the controller board shield. See Controller board shield removal.
3. Remove the fan.
4. Disconnect the MFP wireless cable from the controller board.
5. Remove the scanner front cover. See Scanner front cover removal.
6. Remove the control panel assembly. See Control panel assembly removal.
7. Remove the Control panel board drip pan.
8. Lift the wireless control panel cover.
9. Feed the wireless cable through the channel on the left side of the printer.
- 349 -