4.4.50 Remove paper from standard output bin
Remove the paper stack from the standard bin. The printer automatically detects paper removal and
resumes printing.
If removing the paper does not clear the message, then select Continue on the printer control panel.
For non-touch-screen printer models, press [OK] to confirm.
4.4.51 Replace all originals if restarting job.
From the printer control panel, try one or more of the following:
Select Cancel job to clear the message and cancel the scan job.
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
Select Scan from flatbed to continue scanning from the scanner immediately after the last
successful scan job.
Select Finish job without further scanning to end the last successful scan job.
Select Restart job to restart the scan job with the same settings from the previous scan job.
For non-touch-screen printer models, press [OK] to confirm.
4.4.52 Replace cartridge, 0 estimated pages remain [88.xy]
Replace the toner cartridge to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's
Guide.
4.4.53 Replace cartridge, printer region mismatch [42.xy]
Install a toner cartridge that matches the region number of the printer. x indicates the value of the
printer region. y indicates the value of the cartridge region. x and y can have the following values:
List of printer and toner cartridge regions
Region number
Region
0
Global
1
United States, Canada
2
European Economic Area (EEA), Switzerland
3
Asia Pacific, Australia, New Zealand
4
Latin America
5
Africa, Middle East, rest of Europe
9
Invalid
bizhub 4020/3320 Service Manual
- 105 -