Reverse Solenoid Removal - Konica Minolta bizhub 4020 Service Manual

bizhub 4020/3320 Service Manual
8. Remove the E-clip (E), and then remove the MPF sector gear (F).
6.3.4

Reverse solenoid removal

1. Remove the right cover. See Right cover removal.
2. Remove the left cover. See Left cover removal.
3. Remove the rear door and cover. See Rear exit door removal and Rear cover removal.
4. Remove the scanner assembly. See Scanner assembly removal.
5. Remove the top cover. See Top cover assembly removal.
6. Remove the cooling fan. See Cooling fan removal.
7. Disconnect cable JDSOL1 from the controller board.
- 255 -