Scanner Tests - Konica Minolta bizhub 4020 Service Manual

Print Log Summary
The event log summary is printed.
To print the Event log summary:
From the Diagnostics menu, navigate to Event Log >Print Log Summary.
Clear Log
Use this to remove all the current information in the Event log. This affects both the viewed log and the
printed log information.
To clear the event log:
1. From the Diagnostics menu, navigate to:
Event Log >Clear Log
2. Choose any of the following:
- Yes—To clear the Event log
- No—To exit the Clear log menu

5.1.16 Scanner tests


ASIC test

Motor tests

Feed test

Sensor tests

Scanner calibration reset

ADF magnification
ASIC test
This setting initiates a scan of the scanner ASIC's memory.
To perform this test, do the following:
1. Navigate to Scanner Tests > ACIS Tests.
2. Select ACIS Tests.
3. The test executes. While this test executes, the screen displays ASIC Test Running.... If the
scanner ASIC passed the test, then the panel posts ASIC Test Passed. Rebooting.... If the
scanner ASIC failed the test, then the panel posts ASIC Test Failed. Rebooting....
Motor tests
The motor tests allow you to test the functionality of the motors in the ADF unit.
bizhub 4020/3320 Service Manual
- 202 -