Wiggle Capacity Strip left
and right slightly while
pushing it into loading slot.
Loading
Slot
Rear of Front Panel
2.7.2 WEIGHT UNIT LABELS
The supplied weight unit labels can be applied over the existing "lb" and "kg" unit labels
which are printed on the front panel. For custom units, a transparent label is provided.
Print the custom label on adhesive label stock. Laminate the transparent label to the stock
and trim it to size.
2.7.3 KEY LABELS
The "TEST" key label should be applied over the "UNITS" key when the international key-
board layout is selected. The black label should be applied to the "TARE" or "UNITS" key if
either is locked out. The transparent label can be used for custom functions or can be
laminated to a piece of black label stock to make another "blackout" key.
Capacity
Strip
Top
Edge View
FIGURE 9 – INSTALLING CAPACITY STRIP
Capacity
Flexible
Strip
Loading
Slot
Switch
Panel
9