Table of Contents
Advertisement
24. When the selection is correct, press
25. Press
to save and exit the RF menu.
ZERO
26. Press
to exit to the Communication menu.
ZERO
6.4
AD Inputs
To set the MSI-8000HD RF Indicator up as a Remote display, please see the MSI-8000HD Remote Display manual, available at
www.ricelake.com
6.4.1
Set the Total Number of Load Cells
1. Press
and
F1
2. Press
to scroll to
F2
3. Press
.
tmo.Ld
F1
4. Set the number of load cells attached (2-4) by pressing
save and move to the next number. This number does not include the MSI-8000HD or modems.
5. When the number is correct, press
6. Press
. The current summing mode displays.
F1
7. Press
to scroll to the desired summing mode.
F2
8. Press
to save.
F1
9. Press
twice to exit to the weighing mode.
ZERO
6.4.2
Scan Weight Inputs
1. Program
to the
F1
2. The current channel is displayed, press
displayed briefly, then the scan channel weight is displayed.
3. Press
. In a two sensor system the scan returns to the first channel (0).
F1
6.4.3
Load Totaling Settings
There are four different types of load totaling modes.
All
All channels are added together, press
that the summed channels are being displayed, by briefly displaying
If the sum is the only thing to be observed, disable the Scan function key using the function key setup menu
Note
(Section 4.2 on page 10).
to store the number.
F1
F3
at the same time.
PRINT
.
Adding
displays.
.
add.Ld
F1
function, and
to the
F2
F1
-
to view the sum of all sensors connected. Pressing
Fx
Add.Ld
displays.
On/Off
displays.
Print
to scroll through the numbers and press
F2
displays.
Section
6.4.3.
function for summed sensor readings. See
Add.Ld
to change to the next channel. The scan channel number is
(total remote sensor devices).
add.Ld
© Rice Lake Weighing Systems ● All Rights Reserved
Communications Setup
to
F1
Section
6.4.3.
-
again confirms
Fx
Add.Ld
27
Advertisement
Table of Contents
