Printer Menu - Rice Lake IQ plus 310A Installation Manual

Digital weight indicator
Hide thumbs Also See for IQ plus 310A:
Table of Contents

Advertisement

3.3.4 PRINTER MENU DESCRIPTIONS
NAME/CODE
DESCRIPTION
MODE
Selects the transmission mode of the printer port. In TICKET
mode, the port transmits data as formatted in the PTICKET
(PM)
Menu. In STREAM, the port transmits the selected data format
continuously, starting automatically on power-up. In DEMAND
mode, no output is done to the printer port. Serial output can be
started and stopped using the EDP commands PX and PQ.
BAUD
Selects the transmission speed.
(PB)
BITS
Selects the data bits and parity of transmitted data.
(PP)
TERMIN
End of Line termination characters: carriage return only, line
(PE)
feed only, or both carriage return and line feed options.
The specified characters will be appended to each streamed
serial output for CC, WI120, AN5316, and REMOTE formats,
but not for CAR738, T8142, or T8142CK formats. These
characters will also be sent for each trailing line end specified
for the lines of a ticket for the GENERIC printer.
EOL DLY
End of Line delay: the delay period in milliseconds from when a line
(PD)
is terminated to the beginning of the next formatted printer output.
Both the PRINT button and the EDP Print command (PR) are
disabled during this delay period.
This delay sets the printer port update rate. SYNC synchronizes
streamed serial output to the display rate. If the port is in ticket
mode, the end of line delay for each line will be equal to the display
update interval (the display is not changed while a ticket is being
printed.
FORMAT
Serial string format of continuous printer port transmission. See
(PF)
section 6.4 for exact data format.
CASE
Allows alphabetic output to the printer port to be forced to either
(PA)
all upper case or all lower case.
PRINTER
Indicates the type of ticket printer (if any) connected to the
(PK)
printer port. The setting of this parameter only has meaning if
the printer port is in TICKET mode.
TM290 and TM290RV are used to select the TM290II ticket
printer operating in normal or reverse mode. These settings
automatically release the paper after printing.
22
CODE/SELECTION
0 = STREAM
1 = TICKET
2 = DEMAND
0 = 9600
3 = 1200
1 = 4800
4 = 19200
2 = 2400
0 = 8 NONE
1 = 7 ODD
2 = 7 EVEN
0 = <CR> <LF>
1 = <CR>
2 = <LF>
A=SYNC
4=1000ms
0=0 ms
5=1250 ms
1=250ms
6=1500 ms
2=500ms
7=1750 ms
3=750ms
8=2000 ms
9=2250 ms
0 = CC
1 = WI120
2 = CAR738
3 = AN5316
4 = T8142
5 = T8142CK
6 = REMOTE
0 = MIXED
1 = LOWER
2 = UPPER
0 = GENERIC
1 = TM290
2 = TM290RV

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents