Lucent Technologies definity Installation Manual page 56

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets 555-230-128
1 Install and Cable the Cabinets
Activate and Administer the System
Set Country Options
Some country options need to be set to turn off the red alarm LEDs.
1. Enter change system-parameters country options and press
screen similar to
the Companding Mode field.
Screen 1-1. Typical System Parameters Country-Options Screen
2. The default (United States) companding mode is mu-Law. If the country
uses A-Law companding, type A-Law. Press
3. Set the country codes as needed in the following fields. Refer to
for the country codes. The United States country code (1) is shown in the
example above.
Screen 1-1
NOTE:
Other items eventually need to be entered on this screen, but this is
all that is needed to turn the red alarm LEDs off.
Digital Loss Plan:
Analog Ringing Cadence:
Analog Line Transmission:
displays on the terminal. The cursor is set on
when finished.
Enter
Issue 3
May 1998
Page 1-48
A
Enter.
Table 1-5