Install Equipment Room Hardware; Cross-Connect The Cabinets To The Mdf; Allowable Circuit Packs For Cmc - Lucent Technologies definity Installation Manual

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets 555-230-128
1 Install and Cable the Cabinets

Install Equipment Room Hardware

Install Equipment Room Hardware
Refer to DEFINITY Communications System Generic 1 and Generic 3 Main
Distribution Field Design , 555-230-630, for more information.

Cross-Connect the Cabinets to the MDF

1. Cross-connect the ports on the trunk and line circuit packs to the MDF as
required. See

Allowable Circuit Packs for CMC

Table 1-2 lists the circuit packs that can and cannot be used with Release 6.
Table 1-2. Circuit Packs and Circuit Modules
Apparatus
Code
650A
982LS
CFY1B
CPP1
ED-1E546
(TN566)
(TN567)
ED-1E546
(TN2208)
(TN2170)
J58890M-1
(TN801)
TN417
TN419B
TN420B/C
TN429/B
TN429C
TN429D
TN433
Figure 1-19.
Name
AC Power Unit
Current Limiter
Current Limiter
Memory Expansion
DEFINITY AUDIX R3 System
CallVisor ASAI over the DEFINITY (LAN) Gateway R1
CallVisor ASAI/Call Visor PC/LAN over the DEFINITY
LAN Gateway R2
Auxiliary Trunk
Tone-Clock
Tone Detector
Analog Direct Inward/Outward Dialing (DIOD) Central
Office Trunk
Analog Central Office Trunk
Analog DIOD Trunk - Analog Loop Start
Speech Synthesizer
Issue 3
May 1998
Page 1-29
Allowable
Yes
No
No
No
Yes
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Continued on next page