Lucent Technologies definity Installation Manual page 108

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets 555-230-128
1 Install and Cable the Cabinets
Connect Modem to Telephone Network
Table 1-20. Release 6 CMC Modem Fields — Continued
Field Description
This field controls the number of rings required before the modem
Auto-Answer
answers an incoming call. This field should be set to S0=10.
Ring Number
This field controls the type of interregister signaling used between the
Dial Type
modem and the CO. This 3-character field is denoted by "T" for tone
dialing (default) and "P" for pulse dialing. This setting depends on type
of line (tone or pulse) to the modem.
This field controls the make/break ratios of pulses and DTMF dialing.
Adjustable
Most modems have support for different make/ break options for pulse
Make/Break
dialing only. Paradyne, Intel, and U.S. Robotics use the default &P0 to
Ratio
select a ratio of 39% make and 61% break for communication for the
United States and Canada. The option &P1 sets a ratio of 33% make and
67% break for the United Kingdom and Hong Kong. This is a
5-character blank field (default) and is not case-sensitive.
This field has a default of "D" in a 3-character field. This field denotes the
Dial Command
standard dialing command of the modem and is not case-sensitive.
Most modems provide a timer that abandons any outbound data call
No Answer
after a predetermined interval. This is a non-administrable parameter.
Time-Out
Issue 3
May 1998
Page 1-100
Continued on next page