Lucent Technologies definity Installation Manual page 10

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Compact Modular Cabinets 555-230-128
1 Install and Cable the Cabinets
Unpack and Inspect
2. Equipment comcodes are listed in
3. Before mounting the cabinets, remove the cabinet doors by opening them
and lifting them straight up and off of the hinge pins.
1
qrdmpart KLC 011598
Figure Notes
1. Left panel (also acts as a wall-mount template
and as a floor mount pedestal)
2. CMC cabinet
3. Right panel
4. U.S. Robotics external modem (not shipped
with all systems)
5. #12 x 1-inch shoulder screws
6. Processor interface cable (not shipped with all
cabinets)
Figure 1-1. Equipment Packed with the CMC Cabinet
Table
3
2
7
8
9
10
7. AC power pord (NEMA 5-15P or
8. Vertical TDM/LAN bus cable (not
9. Horizontal TDM/LAN bus cable
10. 14-inch (35.5 cm) 6 AWG (#40) (16
11. Single-point ground block
1-1.
4
6
11
IEC 320)
shipped with all systems)
(not shipped with all systems)
2
mm ) ground wire
Issue 3
May 1998
Page 1-2
5