Processor-And-Dimm Blank; Removing A Processor-And-Dimm Blank - Dell PowerEdge FC430 Owner's Manual

Processor-and-DIMM blank

The processor-and-DIMM blank supplied with your system aids in directing airflow over the unused
processor sockets and DIMM slots.
CAUTION: If you are permanently removing a processor, you must install a socket protective cap
and a processor-and-DIMM blank in the vacant socket to ensure proper system cooling. The
processor-and-DIMM blank covers the vacant sockets for the DIMMs and the processor.

Removing a processor-and-DIMM blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
Steps
1. Press the DIMM latches to unlock the processor-and-DIMM blank.
2. Hold the processor-and-DIMM blank by its edges and lift it away from the system.
Safety instructions.
Before working inside your system.
67