Table of Contents
Advertisement
Figure 18. Installing the cooling shroud
a. cooling shroud
Steps
Lower the cooling shroud into the chassis until it is firmly seated.
Next steps
Follow the procedure listed in the After working inside your system section.
Related References
Safety instructions
on page 51
Related tasks
Removing the cooling shroud
Before working inside your system
After working inside your system
Processor blank and DIMM blank
The processor blank and DIMM blank supplied with your system aids in directing airflow over the unused processor sockets and DIMM
slots.
CAUTION:
If you are permanently removing a processor, you must install a socket protective cap and a processor blank
and DIMM blank in the vacant socket to ensure proper system cooling. The processor blank and DIMM blank covers the
vacant sockets for the DIMMs and the processor.
Removing a processor or DIMM blank
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
Hold the processor/DIMM blank by its edges and lift it away from the system.
68
Installing and removing server module components
on page 66
on page 51
on page 52
Advertisement
Table of Contents
Troubleshooting
