Installing A 1.8 Inch Usata Ssd Into A Ssd Carrier; Removing The 1.8 Inch Usata Ssd Cage - Dell PowerEdge C4130 Owner's Manual

Next steps
Install the SSD into the SSD carrier.
Related Links

Installing a 1.8 inch uSATA SSD into a SSD carrier

Installing a 1.8 inch uSATA SSD into a SSD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Insert the SSD into the SSD carrier with the connector end of the SSD toward the back of the SSD
carrier.
2. Press the SSD until it is firmly seated.

Removing the 1.8 inch uSATA SSD cage

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the 1.8 inch SSD(s) from the SSD cage. For more information, see
uSATA SSD carrier.
Steps
Hold the SSD cage by the edges and lift the cage out of the chassis.
The SSD backplane is attached to the SSD cage. When you lift the SSD cage, the backplane will
disengage from the backplane connector on the system board.
96
Safety instructions.
Before working inside your system.
Removing a 1.8 inch