Installing A 2.5-Inch Hard Drive Or Ssd In A 2.5-Inch Hard-Drive Or Ssd Carrier - Dell PowerEdge M830 Owner's Manual

Blade server
Hide thumbs Also See for PowerEdge M830:
Table of Contents

Advertisement

Figure 48. Removing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier
1.
screw (4)
3.
hard-drive or SSD carrier
Next steps
Install a new 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system

Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier

After working inside your system
Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the hard drive or SSD from a hard-drive or SSD carrier to replace a faulty
hard drive or SSD from a hard-drive or SSD carrier.
2.
hard drive or SSD
4.
screw hole (4)
115

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fc830Fhb

Table of Contents