Make, Answer Or End A Cell Call - AT&T TL96456 Complete User's Manual

Telephone operation
Telephone operation

Make, answer or end a cell call

The TL96276/TL96456 can be used to make or answer calls on the cell line.
You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base. Both cell phones can be used on cell calls at the same time.
Using a handset:
To make a cell call:
• Press CELL 1 or
To predial a cell call:
• Enter the telephone number, then press
To answer a cell call:
HOME/
• Press
(0-9 or TONE ).
To end a cell call:
• Press OFF/
Using the telephone base:
To make a cell call:
• Press CELL 1 or
To predial a cell call:
• Enter the telephone number, then press
To answer a cell call:
• Press HOME,
To end a cell call:
• Press CELL 1 or
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
• If you do not want to answer the call, press REJECT.
• When you try to make a cell call but your cell phone is not connected to the base, the
telephone base displays Cellular phone not connected. Please connect to proceed.. Refer to
Bluetooth connection from idle mode on page 24 and Connect/disconnect an active device
on page 25.
• Make a cell call using the cell lines of your telephone system instead of the remote voice
control feature, if you need to press dialing keys (0-9, TONE , QUIET
CELL 2. Enter the telephone number, then press DIAL.
/SPEAKER,
,
FLASH
, or put the handset in the telephone base or charger.
CANCEL
CELL 2. Enter the telephone number, then press DIAL.
CELL 1, CELL 2 or any dialing key (0-9 or TONE ).
CELL 2.
CELL 1 or
CELL 1, CELL 2 or any dialing key
CELL 1 or
52
CELL 2.
CELL 2.
#
) during a call.