Make An Outgoing Call During Ptt; End Or Leave A Ptt Call - AT&T TL96456 Complete User's Manual

Multiple handset use
Push-to-talk (PTT)
During a one-to-group PTT call:
• To answer an incoming home call, press
destination handsets, or press
• To answer an incoming cell call, press
the destination handsets or the telephone base.
That handset or telephone base answers the outside call. The PTT call
continues for the rest of the PTT participants.
To leave the PTT call without answering the incoming call:
• Press OFF/
base. The telephone continues to ring.

Make an outgoing call during PTT

• During a one-to-one PTT call, press
HOME on the telephone base to get a dial tone. The PTT call ends
press
automatically.
• During a one-to-group PTT call, press
handset, or press
automatically and you get a dial tone.
• During a one-to-group PTT call, press
destination handsets, or press
That handset or telephone base gets a dial tone. The PTT call continues for
the rest of the PTT participants.

End or leave a PTT call

For a one-to-one PTT call, both the initiating and destination devices can end
the PTT call. For one-to-group PTT calls, the initiating devices can end the PTT
call for the group of devices on that PTT call. If any one of the destination
devices leaves the PTT call, the call continues until all participants or the
initiator hangs up.
• Press OFF/
the telephone base. The screen shows Push to talk Ended.
-OR-
• Place the handset in the telephone base or charger, then the handset return
to idle mode.
NOTE: After PUSH TO TALK on the handset or PTT/
the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset
or PTT/
on the telephone base within 10 seconds, the PTT call ends automatically.
FLASH
on the handset, or press CANCEL on the telephone
CANCEL
HOME on the telephone base. The PTT call ends
or END
CANCEL
HOME/
HOME on the telephone base.
CELL 1 or
HOME/
HOME/
HOME/
HOME on the destination telephone base.
on the handset, or press CANCEL or
FLASH
83
on any one of the
FLASH
CELL 2 on any one of
on your handset or
FLASH
on the initiating
FLASH
on any one of the
FLASH
on the telephone base is released,
END on