Bluetooth
Bluetooth setup
NEXT
6.
Press
to turn on the telephone base discoverable
mode. The screen displays Set cell to search base:
AT&T DECT 6.0 PIN: 0000.
7.
Promptly turn on the Bluetooth feature of your cell
phone and search for or add new devices. Once your cell
phone finds your AT&T phone (AT&T DECT 6.0), press
the appropriate key on your cell phone to continue the
pairing process.
•
Your cell phone may require a passcode. In this case,
the telephone base displays Check cellular. ENTER
PASSCODE. Enter the cell phone passcode (typically
0000) into the telephone base and press SET.
•
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process, if required. The telephone base displays
Adding Cell Phone Y (Cell Phone Y represents the
device name of your cell phone).
When a device is successfully connected, the telephone base
displays Cell Phone Y is added and connected to base. and
you hear a confirmation tone (Cell Phone Y represents the
device name of your cell phone). The corresponding status
icon (
1 or
base. The corresponding device light on the telephone base
(CELL 1 or CELL 2/HEADSET) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your TL96276/TL96456. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth
NOTES:
•
The pairing process may take up to one minute. If the pairing process fails, try again.
•
The steps for the pairing process may vary for different cell phones. If this happens, follow the
prompts on your cell phone and your TL96276/TL96456 to complete the pairing process.
•
Refer to the user's manual of your cell phone on how to search for or add a new
Bluetooth device.
2) displays on the handset and telephone
.
22
Set cel l to
search base:
AT&T DECT 6.0
PIN:0000
Adding
Cel l Phone Y
Cel l Phone Y
is added
and connected
to base.