AT&T TL96456 Complete User's Manual page 156

Appendix
Troubleshooting
During power outage, I put a handset in the telephone base but the system
fails to power up.
• Make sure the handset you placed in the telephone base has enough charge
to power up the system.
• Try removing and re-installing the handset's battery. Place the handset in the
telephone base again.
My handset isn't performing normally.
• Make sure the power cord is securely plugged into the telephone base. Plug
the power adapter into a different working electrical outlet not controlled by
a wall switch.
• Move the handset closer to the telephone base. You might have moved out
of range.
• Reset the telephone base. Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the handset and telephone
base to reset.
• Other electronic products such as HAM radios and other DECT phones, can
cause interference to your cordless telephone. Try installing your telephone
as far away as possible from these types of electronic devices.
Out of range OR Base no power appears on my cordless handset.
• Ensure that the telephone base is powered up.
• Place the cordless handset in the telephone base for one minute to allow
the cordless handset and base to synchronize.
• Move the cordless handset closer to the telephone base. You might have
moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the cordless handset and
telephone base to reset.
• Other electronic products such as HAM radios and other DECT phones, can
cause interference to your cordless telephone. Try installing your telephone
as far away as possible from these types of electronic devices.
149