Call Screening - AT&T TL96456 Complete User's Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages can be heard over the
speaker when they are being recorded. If you turn call screening on, you hear
the incoming message. While monitoring an incoming message, you can answer
the call by pressing
on the telephone base.
To turn on or off the call screening feature:
1. Press MENU
2. Press or
CID
SELECT .
3. Press or
CID
SELECT twice to select Call screening.
4. Press or
CID
SELECT
press
NOTE: For more information on call screening, see page 107.
HOME/
FLASH
in idle mode.
to highlight Answering sys, then press
DIR
to highlight Ans sys setup, then press
DIR
to choose between On and Off, then
DIR
to save. You hear a confirmation tone.
or /SPEAKER on the handset, or
113
HOME
ANS SYS SETUP
Cal l screening
# of rings
Remote code
BACK SELECT
CALL SCREENING
On
Off
BACK SELECT
ANSWERING SYS
Cal l screening
# of rings
Remote code
BACK SELECT
CALL SCREENING
On
Off
BACK SELECT