Set Date And Time - AT&T TL96456 Complete User's Manual

Telephone settings
Handset and telephone base settings

Set date and time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. If you do not want to set the date and
time automatically with caller ID information, turn this feature off (see Use
caller ID to automatically set date and time on page 44). However, the year
must be correct so that the day of the week can be calculated from the caller
ID information.
After handset registration or a power failure, the handset or telephone base
will prompt you to set the date and time.
To set the date and time manually:
MENU
1. Press
2. Press or
CID
press SELECT.
3. Press or
CID
enter the 2-digit number using the dialing keys.
4. Press or
CID
or enter the 2-digit number using the dialing keys.
5. Press or
CID
number using the dialing keys, then press
on to set the time.
6. Press or
CID
enter the 2-digit number using the dialing keys.
7. Press or
CID
or enter the 2-digit number using the dialing keys.
8. Press or
CID
2 for AM or 7 for PM, then press
hear a confirmation tone and the screen returns to the
previous menu.
NOTE: If the date and time are not set when a message is recorded, the system announces,
"Time and day not set," before each message plays.
in idle mode.
to highlight Set date/time, then
DIR
to select the month, then press NEXT, or
DIR
to select the day, then press NEXT,
DIR
to select the year, or enter the 2-digit
DIR
to select the hour, then press SAVE, or
DIR
to select the minute, then press SAVE,
DIR
to highlight AM or PM, or press
DIR
NEXT to move
SAVE
to confirm. You
39
SET DATE
09/30/16
MM/DD/YY
BACK NEXT
SET TIME
05:41PM
BACK SAVE
SET DATE
09/30/16
MM/DD/YY
BACK NEXT
SET TIME
05:41 PM
BACK SAVE