Battery Backup Mode; To Activate The Mode; Operation - AT&T TL96456 Complete User's Manual

Dect 6.0 cordless telephone/answering system with bluetooth wireless technology
Table of Contents

Advertisement

Getting started

Battery backup mode

Battery backup mode allows your telephone system to function in the event of
a power outage. The telephone system uses stored power from the handset's
battery to operate.

To activate the mode

After the power goes out, if there is already a handset with
enough charge placed in the telephone base, the telephone
system enters battery backup mode automatically. That
handset screen shows Powering base... Don't pick up. All
other handset screens show Battery backup mode.
-OR-
If there is no handset placed in the telephone base after the
power goes out, all handsets show Out of range OR no power
at base and Put HS on base to power base, alternately.
Place any handset with enough charge in the telephone base.
Its screen shows Powering base... Don't pick up. All other
handset screens show Battery backup mode.
NOTE: A handset which does not have enough charge to power up the
base, its screen shows Out of range OR no power at base and Not
enough battery to power base, alternately, after the power goes out.
Find another system handset that has enough charge to activate the mode.

Operation

During battery backup mode, the telephone base, answering system and all
Bluetooth related features will be disabled. The operating time is subject to the
battery level of the handset placed in the telephone base and the actual usage.
For optimal performance, we recommend that you do not use the handset
placed in the telephone base when this mode is on.
Using other system handsets (Recommended):
Operate the handsets the same way as usual, except the answering system and
all Bluetooth related features which will be disabled.
Using the handset placed in the telephone base:
To maximize the operating time, you are not advised to use this handset. If
you do have to use it, make sure you do not lift it from the telephone base. All
operations should be done with the handset placed in the telephone base. In
this case, calls can only be made and received using the speakerphone.
14
Out of range OR
Base no power
Put HS on base
to power base
Powering base...
Don't pick up
MENU

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl96276

Table of Contents