Glossary Of Terms - AT&T TL96456 Complete User's Manual

Bluetooth

Glossary of terms

Below are some terms used in this user's manual to help you become familiar
with using your Bluetooth devices and your new AT&T telephone system.
Active device slots - the Device list has two active slots for two cell phones,
or one cell phone and one headset. When a device in the list is active it will
have a D1: or D2: in front of the device name. In order to use a Bluetooth
device on a call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular telephone.
CELL line - the telephone line associated with your cell phone service. On
your TL96276/TL96456 handset or telephone base, press
CELL 2 to use the cell line.
Connected - when you pair a Bluetooth device to the TL96276/TL96456,
it is placed in an active slot and automatically connected. When a device is
connected, a 1 and/or 2 will display after
base screen. Also, the CELL 1 and/or CELL 2/HEADSET light on the telephone
base will be on. If a device loses its connection to the telephone base, it must
be reconnected before you can use the device with the telephone system.
Disconnected - when a device is disconnected, 1 and/or 2 displays
after on the handset and telephone base screen. The CELL 1 and/or
CELL 2/HEADSET light on the telephone base is/are off.
Discoverable mode - before a Bluetooth enabled device can be paired, it must
be set to this mode. When pairing your cell phone, the telephone base is in
this mode. When pairing a headset, the headset must be set to this mode.
Depending on the manufacturer, this mode is sometimes referred to as Find Me
or Visibility.
HOME line - your conventional telephone land line. On your TL96276/TL96456,
press HOME/
the home line.
Paired devices - Bluetooth enabled devices (cell phone or headset) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired with the telephone base. However,
only two paired devices can be connected to the base at a time.
Pairing - sometimes refers to as bonding. The process of sharing registration
information between two Bluetooth enabled devices. Your Bluetooth enabled
cell phone or headset must first be paired to the telephone base in order to
use it with this cordless phone system.
PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth
devices. PIN information must be exchanged between Bluetooth devices before
they can be used. This is also known as a Passkey or Passcode.
on the handset or
FLASH
on the handset and telephone
HOME on the telephone base to use
20
CELL 1 or