Dect 6.0 expansion handset for use with at&t models tl92278/tl92328/tl92378 cordless telephone/answering system with bluetooth wireless technology (44 pages)
Installation STOP! You must install and charge See page 4-5 the handset battery before for easy instructions. using the cordless handset. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall.
Telephone base installation Install the telephone base as shown below. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line(s), you must install a DSL filter between the telephone base and the telephone wall jack.
Charger installation Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION Use only the power adapter(s) supplied with this product. To order a replacement www.telephones.att.com power adapter, visit our website at , or call 1 (800) 222-3111 1 (866) 288-4268 .
Battery installation & charging Install the battery as shown on the next page. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use.
Page 6
Battery installation & charging Install the battery as shown below. After installing the battery, you can make and receive short calls. Place the handset in the telephone base or charger when not in use. For optimal performance, charge the handset battery for at least 16 hours before use.
Bluetooth setup To use a Bluetooth-enabled cellular phone with your telephone, you must first pair and connect your Bluetooth cellular phone with the telephone NOTE: Only one base. Bluetooth device Pairing a device can be paired with the telephone base Before you begin, make sure that your Bluetooth- at a time.
Page 8
Bluetooth setup Turning off the auto connection If you do not want the telephone base to re- connect to a paired device automatically after it is disconnected, you can turn off the auto connection feature manually. In order to turn off the auto connection, you will need to initiate a disconnection from the paired cellular phone;...
Quick reference guide - handset CHARGE indicator On when the handset is MENU/SELECT charging in the telephone base or charger. Press to display the menu. While in the menu, press to select an item or save an entry DIR / or setting.
Quick reference guide - handset Feature menu The > symbol shows a Feature menu Using menus highlighted menu item. DIRECTORY Press to scroll through menu items. CALL LOG >DIRECTORY INTERCOM Press SELECT to MENU CALL LOG select or save changes to a RINGER VOLUME highlighted menu item.
Page 11
Quick reference guide - telephone base IN USE indicator • On when the handset is in use, when the answering system is VOICEMAIL indicator answering an incoming call or when you are Flashes when you have registering a handset. new voicemail. Voicemail •...
Need help?
Do you have a question about the TL92278 and is the answer not in the manual?
Questions and answers