Make, Answer Or End A Cell Call - AT&T CLP99283 User Manual

Telephone operation
Make, answer and end a call

Make, answer or end a cell call

The CLP99183/CLP99283/CLP99353/CLP99383/CLP99453/CLP99483/
CLP99553/CLP99573/CLP99583 can be used to make or answer calls on
the cell line. You can connect a maximum of 4 Bluetooth enabled cell phones
to the telephone base. Both cell phones can be used on cell calls at the
same time.
Using a cordless handset:
To make a cell call:
CELL 1 or
• Press
To predial a cell call:
• Enter the telephone number, then press
To answer a cell call:
HOME/
• Press
key (0-9 or TONE ).
To end a cell call:
Press OFF/
CANCEL,
Using the telephone base:
To make a cell call:
CELL 1 or
1. Press
2. Press DIAL.
To predial a cell call:
• Enter the telephone number, then press
To answer a cell call:
HOME,
• Press
To end a cell call:
• Press CELL 1 or
NOTES:
• You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
• If you do not want to answer the call, press
• When you try to make a cell call but your cell phone is not connected to the base, the telephone
base displays Cellular phone not connected. Please connect to proceed. Press
to connect your cell phone to the telephone system. Refer to Bluetooth connection from idle
mode on page 24 and Connect/disconnect an active device on page 25.
CELL 2. Enter the telephone number, then press DIAL.
/SPEA�ER,
or
FLASH
or put the handset in the telephone base or charger.
CELL 2, then enter the telephone number.
CELL 1, CELL 2 or any dialing key (0-9 or TONE ).
CELL 2.
CELL 1 or
CELL 1,
CELL 1 or
REJECT .
50
CELL 2.
CELL 2 or any dialing
CELL 2.
CONNECT