AT&T TL96456 Complete User's Manual page 117

Answering system
Answering system settings
To record a new outgoing announcement:
1. Press MENU
2. Press or
CID
SELECT .
3. Press SELECT
4. Press SELECT
announces, "Record after the tone. Press STOP when you
are done."
5. After the tone, speak towards the microphone of the handset
or the telephone base. Press
6. The newly recorded announcement automatically plays.
Press STOP to stop the playback at any time, or
desired.
To listen to the recorded announcement again, wait after playback has completed,
then scroll to Play annc and press SELECT.
NOTES:
• Your announcement can be up to 90 seconds in length.
• Announcements shorter than two seconds are not recorded.
To delete or reset your outgoing announcement:
MENU
1. Press
2. Press or
CID
3. Press SELECT
4. Press or
CID
prompts Reset to default annc?. Press
announces, "Announcement deleted." and the screen shows Annc. reset to
default before returning to the previous menu.
-OR-
Press or
CID
While the announcement is playing, press
X/DELETE on the telephone base to reset the announcement. The system
announces "Announcement deleted." and the screen shows Annc. Deleted
before returning to the previous menu.
When your announcement is reset, the system answers calls with the default
announcement, as described on page 109. You cannot delete the default
announcement.
in idle mode.
to scroll to Answering sys, then press
DIR
to select Announcement.
again to select Record annc. The system
in idle mode.
to scroll to Answering sys, then press
DIR
again to select Announcement.
to scroll to Reset annc and press SELECT. The screen
DIR
to scroll to Play annc and play the announcement.
DIR
STOP to end recording.
YES
MUTE
110
RECORD to record again, if
SELECT
to confirm. The system
/DELETE on a handset or
Recording
announcement...
STOP
Playing
announcement...
RECORD STOP
.