Bluetooth Setup; Add A Cell Phone - AT&T TL96456 Complete User's Manual

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone or headset with your telephone, you
must first pair and connect your Bluetooth cellular phone or headset with the
telephone base. Then, the TL96276/TL96456 can be used to make or answer
calls on the cell phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user's manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
1. Press MENU
2. Press or
CID
SELECT.
3. Press SELECT
4. Press SELECT
displays Please wait... followed by 1. If cell is
connected to BT device, please disconnect it.
• If there are already four paired devices on the device
list, the fourth one on the list will be automatically
removed, regardless of whether the pairing of the new
device is successful or not.
• If there are already two active devices on the list with
prefix D1: or D2:, the telephone base shows
Cell Phone X is deactivated for adding a new device
(Cell Phone X represents the device name of the active cell phone).
5. Press NEXT. The screen displays 2. Place cell phone next to base.
• All devices that are connected to the telephone base are disconnected
until the pairing process completes.
on the telephone base in idle mode.
to highlight Bluetooth, then press
DIR
to choose Add device.
to choose Add cellular. The screen
21
Cal ler ID log
Intercom
Cal l block
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
ADD DEVICE
Add cel lular
Add headset
BACK SELECT