Wall-Mount To Tabletop Installation - AT&T TL96456 Complete User's Manual

Getting started
Installation options

Wall-mount to tabletop installation

To change the telephone base from the wall-mount position to tabletop
position, follow the steps, as mentioned below.
1. Unplug the large end of the power adapter from the electrical outlet.
2. If the telephone line cord and power adapter cord are bundled, untie
them first. Slide the wall-mount bracket up and remove it from the
wall-mounting plate.
3. Unplug the telephone line cord or the DSL filter from the telephone wall
jack. Push the telephone base up and away from the wall-mount bracket to
detach it from the wall-mount bracket.
4. See Telephone base installation on page 9.
16