Installation Options; Tabletop To Wall-Mount Installation - AT&T TL96456 Complete User's Manual

Getting started

Installation options

Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, use the provided wall-mount bracket to attach to a standard
dual-stud telephone wall-mounting plate. If you do not have this wall-mounting
plate, you can purchase one from many hardware or consumer electronics
retailers. You may need a professional to install the wall-mounting plate.

Tabletop to wall-mount installation

1. Unplug the power adapter from the power outlet. Unplug the telephone
line cord from the wall jack (or DSL filter). Align the holes on the wall-mount
bracket with the standard wall plate and slide the wall-mount bracket down
until it locks securely.
2. Plug the telephone line cord (or DSL filter) into the wall jack.
3. Align the slots on the back of the telephone base with the extended tabs
of the wall-mount bracket, as shown below. Push the telephone base down
until it is securely in place.
4. Plug the power adapter into a power outlet not controlled by a wall switch.
Bundle the telephone line cord and power adapter cord neatly with twist ties,
if necessary.
1
3
2
4
15