Make, Answer Or End A Cell Call - AT&T DL72130 Complete User's Manual

Telephone operation
Telephone operation

Make, answer or end a cell call

The DL72130/DL72210/DL72240/DL72250/DL72310/DL72340/DL72350/
DL72510/DL72570/DL72580 can be used to make or answer calls on the cell
line. You can connect a maximum of two Bluetooth enabled cell phones to the
telephone base.
To make a cell call:
CELL on the handset. The handset displays Select a device.
1. Press
If you have only one cell phone connected to the telephone base, press
f
/SELECT to select the only device.
MENU
If you have two cell phones connected to the telephone, press
f
to select a cell phone and then press
DIR
2. Enter the telephone number, then press
To predial a cell call:
1. Enter the telephone number.
CELL on the handset to dial.
2. Press
If you have only one cell phone connected to the telephone base, it is
f
automatically selected to make cell calls.
If you have two cell phones connected to the telephone base, the handset
f
displays Select a device. Press
then press
To answer a cell call:
Press CELL or /SPEAKER.
f
To end a cell call:
OFF/
Press
f
Notes:
The handset displays Unable to call if your cell phone is in use.
f
You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the
f
telephone base.
The screen shows the elapsed time as you talk (in hours, minutes and seconds).
f
When predialing (preview numbers before dialing), press
f
press and hold
REDIAL
Make a cell call using the cell lines of your telephone system instead of the remote voice control feature, if you need
f
to press dialing keys (0-9, TONE , QUIET
/SELECT.
MENU
, or put the handset in the telephone base or charger.
CANCEL
/PAUSE to insert a dialing pause (a P appears).
MENU
/CELL to dial.
or
CID DIR
/DELETE on the handset to backspace and delete;
MUTE
#
) during a call.
42
/SELECT.
to select a cell phone and
or
CID