Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below.
The telephone base is ready for tabletop use. If you want to change to
wall-mounting, see Installation options on page 15 for details.
Telephone base installation
Plug the large end
of the telephone
base power adapter
into a power outlet
not controlled by a
wall switch.
Route the power
adapter cord through
this slot.
Plug the small end
of the telephone
base power
adapter into the
power adapter jack
on the back of the
telephone base.
9
Plug one end of the
telephone line cord
into a telephone
jack or a DSL filter.
If you have DSL
high-speed Internet
service, a DSL filter
(not included) is
required.
Route the
telephone line cord
through this slot.
Plug the other end
of the telephone
line cord into the
telephone jack on
the back of the
telephone base.
Raise the antenna.