Table of Contents
Advertisement
Telephone operation
Make, answer and end a call
Make, answer or end a cell call
The CLP99287/CLP99387/CLP99457/CLP99487/CLP99547/CLP99557/
CLP99587 can be used to make or answer calls on the cell line. You can
connect a maximum of 4 Bluetooth enabled cell phones to the telephone
base. Both cell phones can be used on cell calls at the same time.
Using a cordless handset:
To make a cell call:
Press CELL 1
f
To predial a cell call:
Enter the telephone number, then press CELL 1
f
To answer a cell call:
HOME/
Press
f
(0-9 or TONE ).
To end a cell call:
OFF/
Press
CANCEL,
Using the telephone base:
To make a cell call:
1. Press CELL 1 or CELL 2, then enter the telephone number.
2. Press DIAL.
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2.
f
To answer a cell call:
Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ).
f
To end a cell call:
Press CELL 1 or CELL 2.
f
Notes:
You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the
f
telephone base.
If you do not want to answer the call, press REJECT.
f
When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays Cellular
f
phone not connected. Please connect to proceed.. Press
system. Refer to Bluetooth connection from idle mode on page 27 and Connect/disconnect an active device
on page 28.
or CELL 2 . Enter the telephone number, then press DIAL.
or /SPEAKER, CELL 1 , CELL 2
FLASH
or put the handset in the telephone base or charger.
or CELL 2 .
CONNECT
to connect your cell phone to the telephone
56
or any dialing key
Advertisement
Table of Contents
