Multiple handset use
Intercom
Using the telephone base:
1.
Press
MENU
2.
Press
or
CID
•
If you have one handset and no other registered device, the telephone
base displays Calling HANDSET 1.
•
If you have other registered device(s) or more than one handset, the
telephone base displays INTERCOM TO: and a list of registered devices.
Press
press SELECT.
-OR-
Use the dialing keys to enter a specific device number (1-9 for
handset 1-9, TONE followed by 0-2 for handset 10-12, or # for a
single headset/speakerphone, # followed by 1 or 2 for headset/
speakerphone 1 or 2, or TONE followed by # for all devices).
The telephone base displays Calling HANDSET X, Calling headset or
Calling all. The destination handset(s) rings and shows Base 0 is calling or
Base 0 is calling all (HANDSET represents the handset name, X represents
the handset number).
NOTES:
•
You can cancel the intercom call before it is answered by pressing
handset, or by pressing
•
If you are calling all handsets, only the first handset to pick up can answer the intercom call.
•
If the destination device does not answer the intercom call within 100 seconds, or if the device
is in use, on a call, or out of range, the initiating device displays No answer. Try again. and
returns to idle mode.
•
To temporarily silence the intercom ringer, press MUTE,
the handset, or press MUTE, CANCEL or MUTE on the telephone base.
•
You can only use one pair of devices at a time to make intercom calls.
in idle mode.
to highlight Intercom, then press
DIR
or
to highlight a destination device or all devices, then
CID
DIR
END
or CANCEL on the telephone base.
OFF/CANCEL or MUTE/
70
SELECT
.
OFF/
on the
CANCEL
DELETE
on